なんだか、すごいことになってきた…

  • 2009年03月18日(水)

終末週末のイベントニコニコ技術部勉強会@京都に向けて、絶賛テンパリ中。

ああ、わけわからん。

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #9: Wed Mar 18 00:58:48 JST 2009
    root@vaio:/usr/obj/usr/src/sys/MYKERN
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.20GHz (1191.02-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8
  Features=0xafe9f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,P
AT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0x180<EST,TM2>
real memory  = 1064173568 (1014 MB)
avail memory = 1023725568 (976 MB)
kbd1 at kbdmux0
acpi0: <SONY> on motherboard
acpi0: [ITHREAD]
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 0.3 (no driver attached)
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xe8000000-0xefffffff,0xe0000000-0xe007ffff irq 9 at device 2.0 on pci0
agp0: <Intel 82855GME (855GME GMCH) SVGA controller> on vgapci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
vgapci1: <VGA-compatible display> mem 0xf0000000-0xf7ffffff,0xe0080000-0xe00fffff at device 2.1 on pci0
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f irq 9 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x003b
usbus0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f irq 9 at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x0010
usbus1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f at device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x0010
usbus2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xe0100000-0xe01003ff at device 29.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib1
cbb0: <TI6420 PCI-CardBus Bridge> irq 9 at device 4.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [FILTER]
fwohci0: <1394 Open Host Controller Interface> mem 0xe0207000-0xe02077ff,0xe0200000-0xe0203fff at device 4.2 on pci2
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 08:00:46:03:01:d6:aa:25
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x1478000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 0a:00:46:d6:aa:25
fwe0: Ethernet address: 0a:00:46:d6:aa:25
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 08:00:46:03:01:d6:aa:25 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
pci2: <mass storage> at device 4.3 (no driver attached)
fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0x3000-0x303f mem 0xe0205000-0xe0205fff irq 9 at device 8.0 on pci2
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:01:4a:24:4f:6c
fxp0: [ITHREAD]
iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xe0206000-0xe0206fff irq 9 at device 11.0 on pci2
iwi0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xe0100c00-0xe0100dff,0xe0100800-0xe01008ff irq 9 at device 31.5 on pci0
pcm0: [ITHREAD]
pcm0: <Analog Devices AD1981B AC97 Codec>
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
acpi_sony0: <Sony notebook controller> on acpi0
acpi_sony0: PID c
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model GlidePoint, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd8000-0xdbfff,0xdc000-0xdffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
Timecounter "TSC" frequency 1191019763 Hz quality 800
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
firewire0: bus manager 0 
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ad0: 57231MB <TOSHIBA MK6006GAH BZ002A> at ata0-master UDMA100
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
acd0: DVDR <MATSHITADVD-RAM UJ-822Sa/1.51> at ata1-master UDMA33
GEOM: ad0s3: geometry does not match label (255h,63s != 16h,63s).
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ugen3.2: <NEC> at usbus3
uhub4: <NEC product 0x0058, class 9/0, rev 2.00/1.00, addr 2> on usbus3
uhub4: 4 ports with 4 removable, self powered
ugen3.3: <ABC> at usbus3
uaudio0: Play: 48000 Hz, 2 ch, 16-bit S-LE PCM format
uaudio0: No recording!
uaudio0: No midi sequencer
pcm1: <USB audio> on uaudio0
WARNING: WITNESS option enabled, expect reduced performance.
Root mount waiting for: usbus3
ugen3.4: <FTDI> at usbus3
uftdi0: <FT232R USB UART> on usbus3
Root mount waiting for: usbus3
ugen3.5: <NEC> at usbus3
uhub5: <NEC product 0x0059, class 9/0, rev 2.00/1.00, addr 5> on usbus3
Root mount waiting for: usbus3
uhub5: 4 ports with 4 removable, self powered
ugen3.6: <RTcorporation> at usbus3
umodem0: <RTcorporation GAINERmini v1.1, class 2/0, rev 2.00/0.00, addr 6> on usbus3
umodem0: data interface 1, has no CM over data, has no break
Root mount waiting for: usbus3
ugen3.7: <Prolific Technology Inc.> at usbus3
uplcom0: <Prolific Technology Inc. USB-Serial Controller, class 0/0, rev 1.10/3.00, addr 7> on usbus3
Root mount waiting for: usbus3
ugen3.8: <STMicroelectronics> at usbus3
umodem1: <STMicroelectronics STM32 Virtual COM Port, class 2/0, rev 2.00/1.00, addr 8> on usbus3
umodem1: data interface 1, has no CM over data, has no break
Trying to mount root from ufs:/dev/ad0s3a
ugen2.2: <Sony> at usbus2
wlan0: Ethernet address: 00:0e:35:eb:f5:bf
lock order reversal:
 1st 0xd850d670 bufwait (bufwait) @ /usr/src/sys/kern/vfs_bio.c:2549
 2nd 0xc4c1d600 dirhash (dirhash) @ /usr/src/sys/ufs/ufs/ufs_dirhash.c:275
  (snip)
ugen3.9: <MDS> at usbus3
ugen3.10: <Strawberry Linux Co.,Ltd.> at usbus3
uhid0: <Strawberry Linux Co.,Ltd. Hygrometer/Thermometer, class 0/0, rev 1.10/1.00, addr 10> on usbus3

こんなん、全部動くように調整できるんか?

Last modified: 2009-03-20
Post-it: New Post-it (help)

Text color: [_][_][_][_]

Background: [_][_][_][_][_][_]

Draw Line:

x: y: