Raspberry Pi @ FreeBSD
進捗状況
- FreeBSD / RasPi 育てる る http://togetter.com/li/507612
リンク
参考情報
- dmesg
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #66 r250580M: Sun May 12 18:08:27 EDT 2013
root@odyssey:/home/db/FreeBSD/obj/arm.armv6/home/db/svn/system/head/sys/RPI-B arm
FreeBSD clang version 3.3 (trunk 178860) 20130405
CPU: ARM1176JZ-S rev 7 (ARM11J core)
Supported features: ARM_ISA THUMB2 JAZELLE ARMv4 Security_Ext
WB enabled LABT branch prediction enabled
16KB/32B 4-way instruction cache
16KB/32B 4-way write-back-locking-C data cache
real memory = 536870912 (512 MB)
avail memory = 448212992 (427 MB)
kbd0 at kbdmux0
simplebus0: <Flattened device tree simple bus> mem 0x20000000-0x20ffffff on fdtbus0
intc0: <BCM2835 Interrupt Controller> mem 0x2000b200-0x2000b3ff on simplebus0
systimer0: <BCM2835 System Timer> mem 0x20003000-0x20003fff irq 8,9,10,11 on simplebus0
Event timer "BCM2835 Event Timer 3" frequency 1000000 Hz quality 1000
Timecounter "BCM2835 Timecounter" frequency 1000000 Hz quality 1000
bcmwd0: <BCM2708/2835 Watchdog> mem 0x2010001c-0x20100027 on simplebus0
gpio0: <BCM2708/2835 GPIO controller> mem 0x20200000-0x202000af irq 57,59,58,60 on simplebus0
gpio0: read-only pins: 46,47,48,49,50,51,52,53.
gpio0: reserved pins: 48,49,50,51,52,53.
gpioc0: <GPIO controller> on gpio0
gpiobus0: <GPIO bus> on gpio0
bcm_dma0: <BCM2835 DMA Controller> mem 0x20007000-0x20007fff,0x20e05000-0x20e05fff irq 24,25,26,27,28,29,30,31,32,33,34,35,36 on simplebus0
mbox0: <BCM2835 VideoCore Mailbox> mem 0x2000b880-0x2000b8bf irq 1 on simplebus0
mbox0: [GIANT-LOCKED]
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x20300000-0x203000ff irq 70 on simplebus0
bcm_sdhci_attach(): SDHCI frequency: 100MHz
mmc0: <MMC/SD bus> on sdhci_bcm0
uart0: <PrimeCell UART (PL011)> mem 0x20201000-0x20201fff irq 65 on simplebus0
dwcotg0: <DWC OTG 2.0 integrated USB controller> mem 0x20980000-0x2099ffff irq 17 on simplebus0
usbus0 on dwcotg0
fb0: <BCM2835 framebuffer device> on fdtbus0
sc0: Unknown <16 virtual consoles, flags=0x300>
simplebus1: <Flattened device tree simple bus> on fdtbus0
Timecounters tick every 10.000 msec
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: <DWCOTG> at usbus0
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
mmcsd0: 3GB <SDHC SU04G 8.0 SN 211325689 MFG 01/2011 by 3 SD> at mmc0 50.0MHz/4bit/65535-block
fb0: 656x416(0x0@0,0) 16bpp
fb0: pitch 1312, base 0x5c006000, screen_size 545792
uhub0: 1 port with 1 removable, self powered
ugen0.2: <vendor 0x0424> at usbus0
uhub1: <vendor 0x0424 product 0x9512, class 9/0, rev 2.00/2.00, addr 2> on usbus0
uhub1: MTT enabled
Root mount waiting for: usbus0
uhub1: 3 ports with 2 removable, self powered
Root mount waiting for: usbus0
ugen0.3: <vendor 0x0424> at usbus0
smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0
smsc0: chip 0xec00, rev. 0002
miibus0: <MII bus> on smsc0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on smsc0
ue0: Ethernet address: b8:27:eb:cf:18:1b
ugen0.4: <Composite USB PS2 Converter> at usbus0
ukbd0: <Composite USB PS2 Converter USB to PS2 Adaptor v1.12, class 0/0, rev 1.10/0.01, addr 4> on usbus0
Root mount waiting for: usbus0
kbd1 at ukbd0
ugen0.5: <vendor 0x07cf> at usbus0
Trying to mount root from ufs:/dev/mmcsd0s2a [rw,noatime]...
warning: no time-of-day clock registered, system time will not be set accurately
smsc0: chip 0xec00, rev. 0002
ugen0.5: <vendor 0x07cf> at usbus0 (disconnected)
ugen0.5: <Primax Elec.> at usbus0
ugen0.4: <Composite USB PS2 Converter> at usbus0 (disconnected)
ukbd0: at uhub1, port 2, addr 4 (disconnected)
ugen0.5: <Primax Elec.> at usbus0 (disconnected)
Last modified: 2013-05-24
Post-it: New Post-it (help)