mutoubushinokonpyuta [ ~/tmp/NetBSD-vax ] % simh-vax netbsd-boot

VAX simulator V3.8-1
netbsd-boot> at xq0 name-of-network-interface-on-host
File open error


KA655-B V5.3, VMB 2.7
Performing normal system tests.
40..39..38..37..36..35..34..33..32..31..30..29..28..27..26..25..
24..23..22..21..20..19..18..17..16..15..14..13..12..11..10..09..
08..07..06..05..04..03..
Tests completed.
>>>boot dua1:
(BOOT/R5:0 DUA1



  2..
-DUA1
  1..0..


>> NetBSD/vax boot [1.11] <<
>> Press any key to abort autoboot 3
Press '?' for help
> boot
getdisklabel: no disk label
nfs_open: must mount first.
3097632+172992 [229872+219958]=0x38c91c
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.0_RC1 (GENERIC.201506190427Z)
MicroVAX 3800/3900
total memory = 65468 KB
avail memory = 59220 KB
kern.module.path=/stand/vax/7.0/modules
mainbus0 (root)
cpu0 at mainbus0: KA655, CVAX microcode rev 6 Firmware rev 83
lance at mainbus0 not configured
uba0 at mainbus0: Q22
dz1 at uba0 csr 160100 vec 304 ipl 17
mtc0 at uba0 csr 174500 vec 774 ipl 17
mscpbus0 at mtc0: version 5 model 3
mscpbus0: DMA burst size set to 4
uda0 at uba0 csr 172150 vec 770 ipl 17
mscpbus1 at uda0: version 3 model 3
mscpbus1: DMA burst size set to 4
qe0 at uba0 csr 174440 vec 764 ipl 17: delqa, hardware address 08:00:2b:aa:bb:cc
rlc0 at uba0 csr 174400 vec 160 ipl 17
rl0 at rlc0 drive 0: RL01, drive not loaded
rl1 at rlc0 drive 1: RL01, drive not loaded
rl2 at rlc0 drive 2: RL01, drive not loaded
rl3 at rlc0 drive 3: RL01, drive not loaded
ts0 at uba0 csr 172520 vec 224 ipl 17: TS11
ts0: rev 0, extended features enabled, transport offline
mt0 at mscpbus0 drive 0: TK50
mt1 at mscpbus0 drive 1: TK50
mt2 at mscpbus0 drive 2: TK50
mt3 at mscpbus0 drive 3: TK50
ra0 at mscpbus1 drive 0: RA92
racd0 at mscpbus1 drive 1: RRD40
ra1 at mscpbus1 drive 2: RD54
rx0 at mscpbus1 drive 3: RX50
ra0: no disk label: size 2940951 sectors
racd0: size 1331200 sectors
ra1: attempt to bring on line failed:  unit offline (not mounted) (code 3, subcode 1)
rx0: attempt to bring on line failed:  unit offline (not mounted) (code 3, subcode 1)
boot device: racd0
root on racd0a dumps on racd0b
root file system type: cd9660
init: kernel secur

You are using a serial console, we do not know your terminal emulation.
Please select one, typical values are:

        vt100
        ansi
        xterm

Terminal type (just hit ENTER for 'vt220'):