Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 6.0 (GENERIC) total memory = 959 MB avail memory = 930 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 MSI MS-7309 (1.0) mainbus0 (root) mainbus0: Intel MP Specification (Version 1.4) (nVidia MCP61 ) cpu0 at mainbus0 apid 0: AMD Sempron(tm) Processor LE-1150, id 0x70ff1 mpbios: bus 0 is type PCI mpbios: bus 1 is type PCI mpbios: bus 2 is type PCI mpbios: bus 3 is type PCI mpbios: bus 4 is type PCI mpbios: bus 5 is type ISA ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 11, 24 pins pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok vendor 0x10de product 0x03ea (RAM memory, revision 0xa1) at pci0 dev 0 function 0 not configured pcib0 at pci0 dev 1 function 0: vendor 0x10de product 0x03e0 (rev. 0xa2) nfsmbc0 at pci0 dev 1 function 1: vendor 0x10de product 0x03eb (rev. 0xa2) nfsmb0 at nfsmbc0 SMBus 1 iic0 at nfsmb0: I2C bus nfsmb1 at nfsmbc0 SMBus 2 iic1 at nfsmb1: I2C bus vendor 0x10de product 0x03f5 (RAM memory, revision 0xa2) at pci0 dev 1 function 2 not configured ohci0 at pci0 dev 2 function 0: vendor 0x10de product 0x03f1 (rev. 0xa3) ohci0: interrupting at ioapic0 pin 5 ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 ehci0 at pci0 dev 2 function 1: vendor 0x10de product 0x03f2 (rev. 0xa3) ehci0: interrupting at ioapic0 pin 10 ehci0: BIOS refuses to give up ownership, using force ehci0: EHCI version 1.0 ehci0: companion controller, 10 ports each: ohci0 usb1 at ehci0: USB revision 2.0 ppb0 at pci0 dev 4 function 0: vendor 0x10de product 0x03f3 (rev. 0xa1) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled vendor 0x1745 product 0x2010 (miscellaneous multimedia) at pci1 dev 9 function 0 not configured wm0 at pci1 dev 10 function 0: Intel i82546GB 1000BASE-T Ethernet (rev. 0x03) wm0: interrupting at ioapic0 pin 11 wm0: 32-bit 33MHz PCI bus wm0: 256 word (8 address bits) MicroWire EEPROM wm0: Ethernet address 00:1b:21:10:a3:4a makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 5 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto wm1 at pci1 dev 10 function 1: Intel i82546GB 1000BASE-T Ethernet (rev. 0x03) wm1: interrupting at ioapic0 pin 5 wm1: 32-bit 33MHz PCI bus wm1: 256 word (8 address bits) MicroWire EEPROM wm1: Ethernet address 00:1b:21:10:a3:4b makphy1 at wm1 phy 1: Marvell 88E1011 Gigabit PHY, rev. 5 makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto hdaudio0 at pci0 dev 5 function 0: HD Audio Controller hdaudio0: interrupting at ioapic0 pin 11 hdafg0 at hdaudio0: Realtek ALC883 hdafg0: DAC00 8ch: Speaker [Jack] hdafg0: DAC01 2ch: HP Out [Jack] hdafg0: DIG02 2ch: SPDIF Out [Jack] hdafg0: ADC03 2ch: CD [Built-In], Line In [Jack], Mic In [Jack] hdafg0: ADC04 2ch: Mic In [Jack] hdafg0: 8ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3 audio0 at hdafg0: full duplex, playback, capture, independent viaide0 at pci0 dev 6 function 0: NVIDIA MCP61 IDE Controller (rev. 0xa2) viaide0: bus-master DMA support present viaide0: primary channel configured to compatibility mode viaide0: primary channel interrupting at ioapic0 pin 14 atabus0 at viaide0 channel 0 viaide0: secondary channel configured to compatibility mode viaide0: secondary channel ignored (disabled) nfe0 at pci0 dev 7 function 0: vendor 0x10de product 0x03ef (rev. 0xa2) nfe0: interrupting at ioapic0 pin 5 nfe0: Ethernet address 00:1d:92:24:89:84 rlphy0 at nfe0 phy 1: RTL8201L 10/100 media interface, rev. 1 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto viaide1 at pci0 dev 8 function 0: NVIDIA MCP61 Serial ATA Controller (rev. 0xa2) viaide1: bus-master DMA support present viaide1: primary channel wired to native-PCI mode viaide1: using ioapic0 pin 10 for native-PCI interrupt atabus1 at viaide1 channel 0 viaide1: secondary channel wired to native-PCI mode atabus2 at viaide1 channel 1 ppb1 at pci0 dev 9 function 0: vendor 0x10de product 0x03e8 (rev. 0xa2) ppb1: PCI Express 1.0 pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled, rd/line, wr/inv ok ppb2 at pci0 dev 11 function 0: vendor 0x10de product 0x03e9 (rev. 0xa2) ppb2: PCI Express 1.0 pci3 at ppb2 bus 3 pci3: i/o space, memory space enabled, rd/line, wr/inv ok ppb3 at pci0 dev 12 function 0: vendor 0x10de product 0x03e9 (rev. 0xa2) ppb3: PCI Express 1.0 pci4 at ppb3 bus 4 pci4: i/o space, memory space enabled, rd/line, wr/inv ok vga1 at pci0 dev 13 function 0: vendor 0x10de product 0x03d1 (rev. 0xa2) vga1: WARNING: ignoring 64-bit BAR @ 0x14 vga1: WARNING: ignoring 64-bit BAR @ 0x1c wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 drm at vga1 not configured pchb0 at pci0 dev 24 function 0: vendor 0x1022 product 0x1100 (rev. 0x00) pchb1 at pci0 dev 24 function 1: vendor 0x1022 product 0x1101 (rev. 0x00) pchb2 at pci0 dev 24 function 2: vendor 0x1022 product 0x1102 (rev. 0x00) pchb3 at pci0 dev 24 function 3: vendor 0x1022 product 0x1103 (rev. 0x00) amdtemp0 at pchb3: AMD CPU Temperature Sensors (K8: core rev DH-G1, socket AM2) isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 attimer0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 npx0 at isa0 port 0xf0-0xff npx0: reported by CPUID; using exception 16 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 attimer0: attached to pcppi0 powernow0 at cpu0: failed to initialize (err 6) timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec uhub0 at usb0: vendor 0x10de OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 8 ports with 8 removable, self powered uhub1 at usb1: vendor 0x10de EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 8 ports with 8 removable, self powered viaide1 port 0: device present, speed: 3.0Gb/s viaide1 port 1: device present, speed: 3.0Gb/s wd0 at atabus1 drive 0 wd0: wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors wd0: GPT GUID: 92f75c4d-9804-9ae0-fb12-fdf57c0d97e5 dk0 at wd0: zfs dk0: 488262367 blocks at 256, type: dk1 at wd0: 9b438237-2934-07cb-d333-dcc46f45736d dk1: 16384 blocks at 488262623, type: wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7 wd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) wd1 at atabus2 drive 0 wd1: wd1: drive supports 16-sector PIO transfers, LBA48 addressing wd1: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors wd1: 32-bit data port wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd1(viaide1:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) umass0 at uhub1 port 2 configuration 1 interface 0 umass0: BUFFALO USB Flash Disk, rev 2.00/40.00, addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: disk removable sd0: fabricating a geometry sd0: 15480 MB, 15480 cyl, 64 head, 32 sec, 512 bytes/sect x 31703040 sectors sd0: fabricating a geometry Kernelized RAIDframe activated boot device: sd0 root on sd0a dumps on sd0b root file system type: ffs uhub2 at uhub0 port 4: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2 uhub2: 4 ports with 4 removable, self powered uhub3 at uhub2 port 4: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 3 uhub3: 4 ports with 4 removable, self powered uhidev0 at uhub3 port 1 configuration 1 interface 0 uhidev0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 4, iclass 3/1 ums0 at uhidev0: 5 buttons and Z dir wsmouse0 at ums0 mux 0 uhub3: port 2, set config at addr 5 failed uhub3: device problem, disabling port 2 wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) syncing disks... 11 8 done unmounted procfs on /proc type procfs unmounted kernfs on /kern type kernfs unmounted ptyfs on /dev/pts type ptyfs sysbeep0: detached midi0: detached wd1: detached dk1 at wd0 (9b438237-2934-07cb-d333-dcc46f45736d) deleted dk0 at wd0 (zfs) deleted wd0: detached npx0: detached pcppi0: detached com0: detached audio0: detached makphy1: detached wm1: detached makphy0: detached Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 6.0 (GENERIC) total memory = 959 MB avail memory = 930 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 MSI MS-7309 (1.0) mainbus0 (root) cpu0 at mainbus0 apid 0: AMD Sempron(tm) Processor LE-1150, id 0x70ff1 ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 11, 24 pins acpi0 at mainbus0: Intel ACPICA 20110623 acpi0: X/RSDT: OemId , AslId acpi0: SCI interrupting at int 9 timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 hpet0 at acpi0: high precision event timer (mem 0xfeff0000-0xfeff0400) timecounter: Timecounter "hpet0" frequency 25000000 Hz quality 2000 attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 midi0 at pcppi1: PC speaker sysbeep0 at pcppi1 npx1 at acpi0 (COPR, PNP0C04): io 0xf0-0xff irq 13 npx1: reported by CPUID; using exception 16 UAR1 (PNP0501) at acpi0 not configured FDC (PNP0700) at acpi0 not configured LPTE (PNP0400) at acpi0 not configured RMSC (PNP0C02) at acpi0 not configured OMSC (PNP0C02) at acpi0 not configured pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12 SIOR (PNP0C02) at acpi0 not configured NVRB (NVRAIDBUS) at acpi0 not configured PCIE (PNP0C02) at acpi0 not configured RMEM (PNP0C01) at acpi0 not configured acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button apm0 at acpi0: Power Management spec V1.2 attimer1: attached to pcppi1 pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok vendor 0x10de product 0x03ea (RAM memory, revision 0xa1) at pci0 dev 0 function 0 not configured pcib0 at pci0 dev 1 function 0: vendor 0x10de product 0x03e0 (rev. 0xa2) nfsmbc0 at pci0 dev 1 function 1: vendor 0x10de product 0x03eb (rev. 0xa2) nfsmb0 at nfsmbc0 SMBus 1 iic0 at nfsmb0: I2C bus nfsmb1 at nfsmbc0 SMBus 2 iic1 at nfsmb1: I2C bus vendor 0x10de product 0x03f5 (RAM memory, revision 0xa2) at pci0 dev 1 function 2 not configured ohci0 at pci0 dev 2 function 0: vendor 0x10de product 0x03f1 (rev. 0xa3) LUB0: Picked IRQ 20 with weight 0 ohci0: interrupting at ioapic0 pin 20 ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 ehci0 at pci0 dev 2 function 1: vendor 0x10de product 0x03f2 (rev. 0xa3) LUB2: Picked IRQ 21 with weight 0 ehci0: interrupting at ioapic0 pin 21 ehci0: BIOS has given up ownership ehci0: EHCI version 1.0 ehci0: companion controller, 10 ports each: ohci0 usb1 at ehci0: USB revision 2.0 ppb0 at pci0 dev 4 function 0: vendor 0x10de product 0x03f3 (rev. 0xa1) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled vendor 0x1745 product 0x2010 (miscellaneous multimedia) at pci1 dev 9 function 0 not configured wm0 at pci1 dev 10 function 0: Intel i82546GB 1000BASE-T Ethernet (rev. 0x03) LNKC: Picked IRQ 16 with weight 0 wm0: interrupting at ioapic0 pin 16 wm0: 32-bit 33MHz PCI bus wm0: 256 word (8 address bits) MicroWire EEPROM wm0: Ethernet address 00:1b:21:10:a3:4a makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 5 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto wm1 at pci1 dev 10 function 1: Intel i82546GB 1000BASE-T Ethernet (rev. 0x03) LNKD: Picked IRQ 17 with weight 0 wm1: interrupting at ioapic0 pin 17 wm1: 32-bit 33MHz PCI bus wm1: 256 word (8 address bits) MicroWire EEPROM wm1: Ethernet address 00:1b:21:10:a3:4b makphy1 at wm1 phy 1: Marvell 88E1011 Gigabit PHY, rev. 5 makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto hdaudio0 at pci0 dev 5 function 0: HD Audio Controller LAZA: Picked IRQ 22 with weight 0 hdaudio0: interrupting at ioapic0 pin 22 hdafg0 at hdaudio0: Realtek ALC883 hdafg0: DAC00 8ch: Speaker [Jack] hdafg0: DAC01 2ch: HP Out [Jack] hdafg0: DIG02 2ch: SPDIF Out [Jack] hdafg0: ADC03 2ch: CD [Built-In], Line In [Jack], Mic In [Jack] hdafg0: ADC04 2ch: Mic In [Jack] hdafg0: 8ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3 audio0 at hdafg0: full duplex, playback, capture, independent viaide0 at pci0 dev 6 function 0: NVIDIA MCP61 IDE Controller (rev. 0xa2) viaide0: bus-master DMA support present viaide0: primary channel configured to compatibility mode viaide0: primary channel interrupting at ioapic0 pin 14 atabus0 at viaide0 channel 0 viaide0: secondary channel configured to compatibility mode viaide0: secondary channel ignored (disabled) nfe0 at pci0 dev 7 function 0: vendor 0x10de product 0x03ef (rev. 0xa2) LMAC: Picked IRQ 23 with weight 0 nfe0: interrupting at ioapic0 pin 23 nfe0: Ethernet address 00:1d:92:24:89:84 rlphy0 at nfe0 phy 1: RTL8201L 10/100 media interface, rev. 1 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto viaide1 at pci0 dev 8 function 0: NVIDIA MCP61 Serial ATA Controller (rev. 0xa2) viaide1: bus-master DMA support present viaide1: primary channel wired to native-PCI mode LSA0: Picked IRQ 20 with weight 1 viaide1: using ioapic0 pin 20 for native-PCI interrupt atabus1 at viaide1 channel 0 viaide1: secondary channel wired to native-PCI mode atabus2 at viaide1 channel 1 ppb1 at pci0 dev 9 function 0: vendor 0x10de product 0x03e8 (rev. 0xa2) ppb1: PCI Express 1.0 pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled, rd/line, wr/inv ok ppb2 at pci0 dev 11 function 0: vendor 0x10de product 0x03e9 (rev. 0xa2) ppb2: PCI Express 1.0 pci3 at ppb2 bus 3 pci3: i/o space, memory space enabled, rd/line, wr/inv ok ppb3 at pci0 dev 12 function 0: vendor 0x10de product 0x03e9 (rev. 0xa2) ppb3: PCI Express 1.0 pci4 at ppb3 bus 4 pci4: i/o space, memory space enabled, rd/line, wr/inv ok vga1 at pci0 dev 13 function 0: vendor 0x10de product 0x03d1 (rev. 0xa2) vga1: WARNING: ignoring 64-bit BAR @ 0x14 vga1: WARNING: ignoring 64-bit BAR @ 0x1c wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 drm at vga1 not configured pchb0 at pci0 dev 24 function 0: vendor 0x1022 product 0x1100 (rev. 0x00) pchb1 at pci0 dev 24 function 1: vendor 0x1022 product 0x1101 (rev. 0x00) pchb2 at pci0 dev 24 function 2: vendor 0x1022 product 0x1102 (rev. 0x00) pchb3 at pci0 dev 24 function 3: vendor 0x1022 product 0x1103 (rev. 0x00) amdtemp0 at pchb3: AMD CPU Temperature Sensors (K8: core rev DH-G1, socket AM2) isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 acpicpu0 at cpu0: ACPI CPU acpicpu0: C1: HLT, lat 0 us, pow 0 mW timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec uhub0 at usb0: vendor 0x10de OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 8 ports with 8 removable, self powered uhub1 at usb1: vendor 0x10de EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 8 ports with 8 removable, self powered viaide1 port 0: device present, speed: 3.0Gb/s viaide1 port 1: device present, speed: 3.0Gb/s wd0 at atabus1 drive 0 wd0: wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors wd0: GPT GUID: 92f75c4d-9804-9ae0-fb12-fdf57c0d97e5 dk0 at wd0: zfs dk0: 488262367 blocks at 256, type: dk1 at wd0: 9b438237-2934-07cb-d333-dcc46f45736d dk1: 16384 blocks at 488262623, type: wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7 wd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) wd1 at atabus2 drive 0 wd1: wd1: drive supports 16-sector PIO transfers, LBA48 addressing wd1: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors wd1: 32-bit data port wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd1(viaide1:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) umass0 at uhub1 port 2 configuration 1 interface 0 umass0: BUFFALO USB Flash Disk, rev 2.00/40.00, addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: disk removable sd0: fabricating a geometry sd0: 15480 MB, 15480 cyl, 64 head, 32 sec, 512 bytes/sect x 31703040 sectors sd0: fabricating a geometry Kernelized RAIDframe activated boot device: sd0 root on sd0a dumps on sd0b root file system type: ffs uhub2 at uhub0 port 4: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2 uhub2: 4 ports with 4 removable, self powered uhub3 at uhub2 port 4: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 3 uhub3: 4 ports with 4 removable, self powered uhidev0 at uhub3 port 1 configuration 1 interface 0 uhidev0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 4, iclass 3/1 ums0 at uhidev0: 5 buttons and Z dir wsmouse0 at ums0 mux 0 uhub3: port 2, set config at addr 5 failed uhub3: device problem, disabling port 2 wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)